MS - 500 Series
The desk/table top semi-automatic gross leak testing unit is equipped with easily  changeable capsules and a semi-automatic clamping jig.

Applications:
·For determining the need to equip the MS-5000 Series Gross Leak Testing System.
·For testing low-quantity production items.
·Sample testing.
Appropriately selected capsules allow measuring test parts up to 40 x 50.
(Minimum applicable size 3mm x 3mm)

FGC Series  Gas Charger

As electronic component packages become smaller, maintaining accuracy with conventional manual leak testing methods becomes difficult. This especially becomes evident when testing SMD components with dimensions of 3 x 3 mm or 2 x 2 mm. When manually testing these parts, He gas evaporates into the atmosphere as the test procedure is repeated 2 - 3 times to locate a detected leak. The FGC-500 Series is designed to automatically charge test parts in small chambers with He gas and supply the charged parts into the leak tester to create a fully automated, highly accurate leak testing system.
The desk/table top semi-automatic gross leak testing unit is equipped with easily  changeable capsules and a semi-automatic clamping jig.

MS 5100 Series    In-Line Gross Leak Testers

This semi-automatic unit combines testing capsules, clamping jigs and leak testing system.

This multi-channel testing system automatically inserts capsules into the test chambers using external actuation signals, conducts the leak test, and returns the capsules to their initial position, when leak testing and evaluation processes are completed. User may determine the number of channels required for a particular test (4 - 10). Since the user chooses and applies the handling system, employing this unit can be done at reduced cost.

MS - 5000 Series
Gross leak testing system detects and evaluates the test parts fed through the parts feeder. Fully automated gross leak testing system with the following procedures: Supply, line-up, transport, measurement and evaluation.

• Fully automatic gross leak testing system inspects and evaluates every work part that is loaded into the system. This system automatically processes the following operations in sequential order: Parts supply- line-up- transport- testing- evaluation.
  
• Applicable test parts:   Electronic components up to O12 x 3mm.   2x2mm (When FL-515 is applied)
• Multiple test part application is possible by changing the parts feeder components, testing capsules and other settings.

MH - 50000 Series  
This system conducts the fine leak testing process automatically, replacing the need for manual operation.

Fine leak testing with an integrated helium leak tester inspects each part individually.
During normal operation, all channels are inspected simultaneously, however, when a reject (fail) is detected, independent inspection of each individual channel is conducted.
 

MSH- 5000 Series
Fully automated system that processes gross and fine leak tests.

The most recent advanced development in leak testing. This fully automated system unit is capable of conducting gas bombing and fine and gross leak tests.

This system tests and evaluates helium-charged test parts and discharges fine leak and gross leak rejects (fail) into separate boxes.

FL-510~515   & Indicator MI-170T Series  
                          Leak Testing Manifold Unit
Compact leak testing unit with minimized internal volume and mounting area.

This unit is specially designed to be used with MS and MSH gross leak testing systems.

Minimized internal volume and mounting area allows testing of minute test parts.